Modal title
100 watt 2-channel acoustic amplifier with vocal processing looper tannoy dual concentric speaker top firing tweeter
HARMONY V100
Whatsapp for enquiry100 Watt 2-Channel Acoustic Amplifier with Vocal Processing, Looper, Tannoy Dual Concentric Speaker, Top Firing Tweeter
HARMONY V100
Whatsapp for enquiryAll In One Performance Companion
The Harmony V100 Acoustic Amplifier is crammed full of features and innovations that can help you weave intricate, evolving sounds at home or in clubs and halls. Maximize your audio potential to capture attention and hold it with an array of fascinating vocal and guitar effects and looping in an easy-to-carry processor and amplifier system.
Immersive Guitar sound
Leave your pedals at home. A suite of sweet guitar effects that would normally require a large pedal board is included. There’s a fast, accurate Tuner, BodyRez to improve the feel and tone of your undersaddle pickup, 3 band EQ and separate Chorus, Reverb and Echo with their own styles and mix controls. All you add is a guitar and your groove.
Stunning Vocals
Everybody knows the main link to an audience is vocals and TC Helicon’s studio-quality vocal processing lets your voice shine. With Adaptive Tone for instant “producer polish”, transparent pitch correction, two additional virtual Harmony voices and the lush expansiveness of Reverb and Echo, your voice will excite like never before.
Audio inputs
Guitar input |
¼" TRS balanced/XLR combo |
Input impedance |
2 MΩ balanced/1 MΩ unbalanced |
Microphone input |
¼ " TRS balanced/XLR combo |
Input impedance |
XLR: 2.9kΩ balanced; ¼" 10kΩ TRS balanced/5k TS unbalanced |
Aux input |
3.5 mm TRS stereo |
Input impedance |
19 kΩ |
Audio outputs
Guitar/right out and Mic/left out |
XLR balanced, female |
Output impedance |
400 Ω |
Max. output level |
0 dBu |
Switches |
DI, FX, Mix |
Headphones out |
3.5 mm TRS stereo |
Output impedance |
10 Ω |
Max. output level |
8 dBu |
Vocal section controls
Knobs |
Volume (1 to 10) Adaptive tone (off to max) Correction (off to max) Harmony selector, 8 position Reverb (off, room, club, hall) Echo (off, tape, digital, slap) |
Switches |
Phantom on/of Talk on/of Anti-feedback on/off Harmony enable/disable |
LEDs |
Phantom (red), Reverb (green), Echo (green), Harmony voice (green, 8 selections |
Backlit switches |
Talk (green), anti-feedback (green, or blue when operating), harmony (green) |
Guitar section controls
Knobs |
Volume (0 to 10) Bass, shelving (-12 to 12 dB) Mid, peaking (-12 to 12 dB) Treble, shelving (-12 to 12 dB) Chorus (detune, silk, corona) Reverb (off, room, club, hall) Echo (off, tape, digital, slap) |
Switches |
Mute on/off Anti-feedback on/off Bodyrez off, Bodyrez-1, Bodyrez-2 Bodyrez-3 Harmony enable/disable |
Display |
Tuner note 8-segment, red |
LEDs |
Chorus (green), reverb (green), echo (green) Tuner sharp/flat/in-tune (red) |
Backlit switches |
Mute (red), anti-feedback (green, or blue when operating), bodyrez (red, green, blue selections) |
Footswitchable controls
Microphone Section |
Talk on/off Harmony on/off at the current setting Reverb on/off Echo on/off |
Guitar section |
Mute on/off Chorus on/off Reverb on/off Echo on/off Harmony on/off at a selected setting |
Looper section |
Tap Tempo Play/record Stop |
LEDs |
Green when footswitch engaged, red when recording |
Looper controls
Knobs |
Level (0 to 10) |
Switches |
Voice/all/guitar Tap tempo Play/record Stop |
Backlit switches |
Tap tempo (flash red at tempo), play/record (green play, red record), stop (red) |
Rear panel section
Connections |
AC input IEC USB B type Foot switch, 5-pin DIN (for FST4 only) Guitar/right out, XLR male Mic/left out, XLR male Aux in, 3.5 mm |
Switches |
AC power on/off toggle Top tweeter on/off Guitar/right out, DI/FX/MIX selector Mic/left out, DI/FX/MIX selector Ground lift, XLR audio |
Knobs |
Aux input level (0-10) |
USB
Type |
Class compliant USB 2.0, type B |
Supported Operating Systems |
Windows 7 or higher Mac OS X 10.6.8 or higher |
Windows driver |
Required driver is supplied |
Audio input and output |
2 channels, 24 bit, 48kHz |
Amplifier
Output power |
110 W |
Type |
Class- D |
Protection |
Short circuit, thermal |
Loudspeakers
Type |
10" dual-concentric, Tannoy |
Impedance |
4 Ω |
Power handling |
400 W |
Top tweeter (switchable on/off) |
1" |
Impedance |
4 Ω |
Overall frequency response |
80 Hz - 20 kHz (+/- 3 dB) 46 Hz - 24 kHz (- 10 dB) |
Maximum SPL |
118 dbSPL |
Footswitch (supplied) (any switch can operate any footswitchable control)
Type |
FST4 |
Switches |
Harmony on/off (with LED) Vocal FX on/off (with LED) Guitar FX on/off (with LED) Looper on/off (with LED) |
Power Supply
Mains Voltage |
100-240 V~ 50/60 Hz |
Power consumption |
40 W |
Mains connection |
Standard IEC receptacle |
Power Switch |
Rocker, rear panel |
Dimensions/Weight
Dimensions (H x W x D) |
377 x 408 x 311 mm (14.8 x 16.1 x 12.2") |
Weight |
13.3 kg (29.3 lbs) |